Fluid - A/T: Testing and Inspection

Fluid Level and Condition Check

CAUTION: The vehicle should not be driven if the fluid level is low as internal failure can result.

NOTE:
The transmission fluid temperature must be between 50°C (122°F) and 60°C (140°F) whilst checking level. Should the temperature rise above this figure, abort the check and allow the transmission fluid to cool.
This vehicle is not equipped with a fluid level indicator. An incorrect level may affect the transmission operation and could result in transmission damage. To correctly check and add fluid to the transmission. For fluid level checks refer to the relevant section of this product.

Fluid Condition Check
Use the following procedure to check the fluid condition, which is a good indicator of the internal condition of the transmission:
1 Check the fluid level.
2 Observe the colour and the odor of the fluid. The colour under normal circumstances should be reddish, not brown or black.
- If in doubt, compare the fluid with that from a new, sealed container.
3 Allow the fluid to drip onto a facial tissue and examine the stain.
4 If evidence of solid material is found, the transmission fluid pan should be removed for further inspection.