Battery Tray: Service and Repair

Battery Tray

Removal

NOTE:
Removal steps in this procedure may contain installation details.
1 Disconnect the battery ground cable. For additional information, refer to Specifications Battery and Charging System
2
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
3 For additional information, refer to Battery Removal and Replacement
4 For additional information, refer to Fender Splash Shield Fender Splash Shield




5
NOTE:
LHD illustration shown, RHD is similar.
TORQUE: 10 Nm




6
NOTE:
LHD illustration shown, RHD is similar.
TORQUE: 5 Nm

Installation
1 To install, reverse the removal procedure.