Rear Safety Belt Buckle

Rear Safety Belt Buckle

Removal
1 Remove the rear seat. For additional information, refer to Rear Seat Rear Seat




2 Remove the rear seat backrest inner hinge cover.
- Remove the 3 screws.




3 Remove the rear seat backrest outer hinge cover.
- Remove the 2 screws.




4 Remove the rear seat base lower trim panel.
- Remove the 6 clips.
- Reposition the rear seat hinge plates for access.




5 Release the rear seat cushion cover from the rear seat base.
6 Reposition the rear seat cushion and seat cushion cover for access.
7 Remove the LH rear safety belt buckle.
- Remove and discard the bolt.

Installation
1 Install the LH rear safety belt buckle.
- Install the new bolt and tighten to 25 Nm (18 lb.ft).
2 Reposition the rear seat cushion and seat cushion cover for access.
3 Secure the rear seat cushion cover to the rear seat base.
4 Install the rear seat base lower trim panel.
- Install the 6 clips.
- Reposition the rear seat hinge plates for access.
5 Install the rear seat backrest outer hinge cover.
- Remove the 2 screws.
- Install the 2 screws.
6 Install the rear seat backrest inner hinge cover.
- Install the 3 screws.
7 Install the rear seat. For additional information, refer to Rear Seat Rear Seat