Auxiliary Cabin Heater Transceiver: Service and Repair
Television (TV) Amplifier and Fuel Fired Booster Heater Transceiver Unit
Removal
1 Remove the access panel from the loadspace trim panel RH.
2 Disconnect the 2 coaxial cables from the television (TV) amplifier and fuel fired booster heater transceiver unit.
3 Release the TV amplifier and fuel fired booster heater transceiver unit.
4 Remove the TV amplifier and fuel fired booster heater transceiver unit.
- Disconnect the electrical connector.
Installation
1 Install the TV amplifier and fuel fired booster heater transceiver unit.
- Connect the electrical connector.
2 Secure the TV amplifier and fuel fired booster heater transceiver unit.
- Tighten the bolt to 6 Nm (4 lb.ft).
3 Connect the TV amplifier and fuel fired booster heater transceiver unit.
4 Install the access panel to the loadspace trim panel RH.