Television (TV) Amplifier

Television (TV) Amplifier

Removal
1 Remove the access panel from the loadspace trim panel RH.




2 Disconnect the television (TV) amplifier RH coaxial cable connector.
3 Release the TV amplifier RH.
- Remove the bolt.
4 Remove the TV amplifier RH.
- Disconnect the electrical connector.

Installation
1 Install the TV amplifier RH.
- Connect the electrical connector.
2 Secure the TV amplifier RH.
- Tighten the bolt to 6 Nm (4 lb.ft).
3 Connect the TV amplifier RH coaxial cable connector.
4 Install the access panel to the loadspace trim panel RH.