Cylinder Head Assembly: Specifications

Cylinder Head Torque & Sequence / Bolt re-usability Service and Repair


Surface Variation -- Head-to-block, Head-to-manifolds And Surface Variation -- Warpage







Cylinder head maximum permitted warp (mm) (flatness specification) overall 0.08
over 150 x 150 mm area 0.05
over 25 x 25 mm area 0.02

Camshaft Bearing Cap







Camshaft LH

Step 1 :Torque to 3 Nm

Step 2 :Torque to 12 Nm

NOTE: Tighten the bolts in the indicated sequence.











Camshaft RH


Step 1: Torque to 3 Nm
Step 2: Torque to 12 Nm

NOTE: Tighten the bolts in the indicated sequence.






Intake Manifold Specifications

Exhaust Manifold Specifications