Rear Vision Camera: Service and Repair

Parking Aid Camera

Removal
1 Remove the rear spoiler. For additional information, refer to Rear Spoiler Service and Repair




2 Remove the parking aid camera.
- Remove the screw.
- Release the 2 clips.




3 Remove the parking aid camera bracket.
- Drill out the rivet.
- Release the parking aid camera bracket, adhesive pads.

Installation
1
NOTE:
Make sure that all the component mating faces are clean.
Install the parking aid camera bracket.
- Secure the bracket with new adhesive pads and rivet.
2 Install the parking aid camera.
- Secure the clips.
- Install the screw.
3 Install the rear spoiler. For additional information, refer to Rear Spoiler Service and Repair