Campaign SA133 - AVN Software Upgrade

GROUP
Electrical

NUMBER
050

MODEL
2013MY Rio (UB)

DATE
November 2012

SUBJECT
SERVICE ACTION: AVN SOFTWARE UPGRADE (SA133)





This bulletin describes the procedure to update the navigation system software and modify the phone pairing logic in 2013MY Rio vehicles with navigation system (AVN) and manus transmission, produced From June 12, 2012 to Aug. 29, 2012. Verify navigation system software version by referring to the table; then follow the procedure outlined in this TSB to update the navigation system. Kia is requesting the completion of this Service Action on all affected vehicles in dealer stock prior to delivery. Before conducting procedure verify that the vehicle is included in the list of the affected VINs.

Software Upgrade Procedure:





1. If viewing this TSB electronically click the link below:

https://www.kiatechinfo.com/pds/Downloads/UBA_120906_MICOM.exe

Otherwise, log on to KiaTechInfo.com and click on "Diagnostic Tools," then click "Software Downloads" from the Navigation Menu.





2. Click on "2013 Rio AVN System update Download" link.





3. Click "Save."





4. Click "Save."





5. Click "Open Folder."





6. Click on update file to open it. The file name is UBA_120906_MICOM.





7. Click Run





8. Insert a flash drive into USB port on your computer; click "Unzip" and the files will be downloaded onto the USB flash drive.

9. Turn the ignition key to "ACC" or "ON" position.

CAUTION

Make sure the battery is fully charged before beginning the update, otherwise there could be data loss or damage to system.

Turn on the Audio system by pushing the POWER button

NOTICE

While conducting the software upgrade procedure, make sure to keep the ignition key in the "ACC" or "ON" position Do NOT turn the ignition key to any other position.





10. Insert the upgrade USB flash drive into the USB port.





11. Push the "SETUP" button then press "Agree" on the screen.





12. Push "Main" button on the screen.





13. Push "System Info" button on the screen.








14. Push "Map Upgrade" button on the screen.





15. Start the upgrade by pushing the "Yes" button on the screen.








16. The upgrade will take approximately 5-10 minutes to complete. System will restart after the upgrade has completed.

17. When the upgrade is complete, the AVN system will restart automatically. Remove the USB flash drive at this point.





18. Push the POWER button to turn on the head unit





19. Push the "SETUP" button, then press the "Agree" button on the screen





20. Push the "Main" button on the screen





21. Push "System Info" button on the screen.





22. Verify new software version is UB.USA.SOP.00.014_MT2.








23. Check the interior of the vehicle (i.e. glove compartment, center console, etc ) for phone pairing instructions, as shown below. Any instructions found should be removed from the vehicle and discarded as this update will modify the phone pairing logic to match the information in the owner's manual.





AFFECTED VEHICLE PRODUCTION RANGE:





WARRANTY CLAIM INFORMATION: