Repair Procedures

Removal

1. Remove the floor console assembly.

2. Disconnect sports mode connector (A).




3. Remove the control cable (A).




4. Loosen the mounting nut (A) and shift lock cable from the shift lock cam (B).

Tightening torque:
9.8 - 13.7 N.m (1.0 - 1.4 kgf.m, 7.2 - 10.1 lb-ft)




5. Remove the shift lever assembly (A) by removing the bolts.

Tightening torque:
8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb-ft)




6. Installation is the reverse of removal.

NOTE:
- When installing, set room side lever and T/M side lever to N position.
- Adjust the shift lock cable after installing.