Entertainment Systems: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the center fascia panel (B) using the SST(A) (09840-1E100).






CAUTION:
Always use the SST(09840-1E100) to prevent the damage when removing the center fascia panel.


3. Remove the center air vent LH and RH.

4. Remove the keyboard panel (A) after loosening screws.




5. Disconnect the connectors (A) from the keyboard facia panel and heater control unit.








6. Remove the mounting bolts (4EA) then remove the AVN unit (A).




7. Disconnect the AVN connectors and cable (A).






Installation

1. Connect the AVN unit connectors and cable.
2. Install the keyboard panel.
3. Install the crash pad center facia panel.
4. Check the AVN system.

NOTE:
- Make sure the AVN head unit connectors are plugged in properly, and the antenna cable is connected properly.