Flex Plate

Flex Plate

A/T : Install drive plate (A).

Tightening torque 117.7 - 127.5 N.m (12 - 13 kgf.m, 86.8 - 94.0 lb-ft)






NOTE:
- Always use new flywheel(drive plate) bolts (C).
- Apply sealant to the screw part(8mm from the end of the bolt) when using new flywheel bolts.
Sealant :Three bond 2403, Loctite 200 or 204





- Install and uniformly tighten the 7 bolts, in several passes.