Repair Procedures

Replacement

1. Remove the rear wheel & tire.
(Both RH side and LH side)

Tightening torque :
88.3 - 107.9N.m(9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
Be careful not to damage to the hub bolts when removing the rear wheel & tire.

2. Remove the rear shock absorber (A) from the frame by loosening the bolt.
(Both RH side and LH side)

Tightening torque :
98.1 - 117.7N.m(10.0 - 12.0kgf.m, 72.3 - 86.8lb-ft)




3. Remove the coil spring.
4. Installation is the reverse of removal.

Inspection

1. Check the coil spring for crack and deformation.
2. Check the coil spring pad for damage and deformation.