Control Arm: Service and Repair

Replacement

1. Remove the front wheel & tire.

Tightening torque :
88.3 - 107.9N.m(9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
Be careful not to damage to the hub bolts when removing the front wheel & tire.

2. Loosen the nut and remove the lower arm (A).

Tightening torque :
58.8 - 70.6N.m(6.0 - 7.2kgf.m, 43.4 - 52.1lb-ft)




3. Remove the lower arm (C) by loosening the bolt (A) and (B).

Tightening torque :
(A)
98.1 - 117.7N.m(10.0 - 12.0kgf.m, 72.3 - 86.8lb-ft)
(B)
156.9 - 176.5N.m(16.0 - 18.0kgf.m, 115.7 - 130.2lb-ft)




4. Installation is the reverse of removal.

Inspection

1. Check the bushing for wear and deterioration.
2. Check the lower arm for deformation.
3. Check the all bolts and nuts.