Repair procedures

Removal

1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2. Turn the steering wheel so that the front wheels can face straight ahead.
3.

Remove the airbag module.
4. Disconnect the lock nut (A) & connector (B) and then remove the steering wheel by using special service tools. (09561-11001)









CAUTION:
- Do not hammer on the steering wheel to remove it; it may damage the steering column.

5. Installation is the reverse of the removal.

Disassembly

1. Loosen the screw(6ea) and remove the lower cover (A) from the steering wheel body.




2. Disconnect the heated steering wheel unit connector (A) and remove the heated steering wheel unit (B) and wiring (C) and then loosen the screw(2ea).




3. Remove the remote control assembly (A) from the steering wheel body.




4. Installation is the reverse of the removal.