Wiper Switch: Service and Repair

Inspection

Wiper And Washer Switch Inspection
With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multi-function switch.





Wiper Switch (Intermittent)





Washer Switch





Rear wiper switch





Rear washer switch






Removal

Wiper and Washer Switch
1. Disconnect the negative (-) battery terminal.
2. Remove the steering wheel.

3. Remove the steering column upper (A) and lower (B) shrouds after removing the screw.








4. Disconnect the connector(A). Release the lock of wiper switch using tool without removing the steering wheel and the clock spring.
Remove the wiper and washer switch.






Installation

1. Install the wiper switch.
2. Install the steering column upper and lower shrouds.