Evaporative Emission Control Canister: Service and Repair

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Lift the vehicle.
3. Remove the fuel tank.

4. Disconnect the vapor tube quick-connector (A) and the vapor hose (B).
5. Remove the canister assembly after removing installation bolts (C).






Inspection

1. Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube




A: Canister <-> Atmosphere (Fuel tank air filter)
B: Canister <-> Intake manifold
C: Canister <-> Fuel tank

Installation

Installation is the reverse of removal.

Canister installation bolt/nut:
19.6 - 29.4 N.m (2.0 - 3.0 kgf.m, 14.5 - 21.7 lb-ft)