Turn Signal Lamp: Service and Repair

Removal

Door Mirror Turn Signal Lamp
1. Using a screwdriver or remover, remove the mirror (A) from the mirror holder.
Be careful not to damage to the clip.




2. Remove the front cover (A), after loosening 3 screws.




3. Remove the rear cover (A).




4. Disconnect the mirror connector.Remove the door mirror turn signal lamp (A) after loosening screw.






Installation

Door Mirror Turn Signal Lamp
1. Install the door mirror turn signal lamp to the door mirror.
2. Install the door mirror.
3. Connect the negative (-) battery terminal.