Dome Lamp: Service and Repair

Inspection

Room Lamp
Remove the room lamp assembly then check for continuity between terminal. If the continuity is not as specified, replace the room lamp assembly.














Removal

Room Lamp
1. Disconnect the negative (-) battery terminal.
2. Remove room lamp lens (B).
3. Remove the room lamp assembly (A) after loosening the mounting screws.




4. Disconnect the connector (A).




5. If it is necessary, replace the room lamp bulb (A).





Vanity Lamp
1. Disconnect the negative (-) battery terminal.
2. Remove the vanity lamp assembly (A) after disconnecting the connector (B).





Luggage Lamp
1. Disconnect the negative (-) battery terminal.
2. Remove the luggage lamp assembly (A) after disconnecting the connector (B).

[4 Door]





[5 Door]






Installation

Room Lamp
1. Install the room lamp assembly after connecting the room lamp connector.
2. Install the room lamp lens.
3. Connect the negative (-) battery terminal.

Vanity Lamp
1. Install the vanity lamp assembly after connecting the vanity lamp connector.
2. Connect the negative (-) battery terminal.

Luggage Lamp
1. Install the luggage lamp assembly after connecting the connector.
2. Connect the negative (-) battery terminal.