Repair Procedures

Replacement

Outside Rear View Mirror Replacement

CAUTION:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the outside rear view mirror cover (A).




2. After loosening the mounting bolts, then remove the outside rear view mirror (A).

Tightening torque :
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)




3. Disconnect the outside rear view mirror connector (A).




4. Installation is the reverse of removal.

Inside Rear view Mirror Replacement
1. Loosen the mounting screw (C).
2. Push the inside rear view mirror base (B) up to remove to inside rear view mirror assembly (A).




3. Installation is the reverse of removal.