Console Lamp: Service and Repair

Inspection

Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the overhead console lamp assembly.










Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the overhead console lamp lens (B).




3. After loosening the mounting screws, then remove the room lamp (A).




4. Disconnect the connectors (A) of sunroof switch and lamp switch then remove the overhead console lamp assembly.




5. If it is necessary, replace the bulb (A) after opening the overhead console lens.






Installation

1. Install the overhead console lamp after connecting the sunroof switch connector and lamp connector.
2. Install the lens after tightening 2 screws.