Rear Fender Liner: Service and Repair

Replacement

Rear Wheel Guard Replacement

CAUTION:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the rear tire.
2. After loosening the mounting clips and screws, then remove the rear wheel guard (A).
[A Type]




[B Type]




3. Installation is the reverse of removal.

NOTE:
- Replace any damaged clips.

Rear Mud Guard Replacement

CAUTION:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. After loosening the mounting clip and screws, then remove the rear mud guard (A).




2. Installation is the reverse of removal.

NOTE:
- Replace any damaged clips.