Cowl Moulding / Trim: Service and Repair

Replacement

1. Remove the wiper arm cover (B).
2. After loosening the mounting nuts, then remove the wiper arm (A).

Tightening torque :
22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)




3. Remove the washer nozzle hose (B).
4. Detach the clips, then remove the cowl top cover (A).




5. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.