Rear Door Panel: Service and Repair

Replacement

Door Trim Replacement
[5 Door]

CAUTION:
- Take care not to scratch the door trim and other parts.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the rear door delta inner cover (A).




2. After loosening the mounting screw, then remove the rear door inside handle housing (B).
3. After loosening the mounting screws, then remove the rear door trim (A).




4. Disconnect the power window connector (A).




5. Installation is the reverse of removal.

NOTE:
- Make sure connectors are connected properly and each rod is connected securely.
- Make sure the door lock and opens properly.
- Replace any damaged clips.

[4 Door]

CAUTION:
- Be careful not to scratch the door trim and other parts.
- Put on gloves to protect your hands.

1. After loosening the mounting screw, then remove the rear door inside handle housing (B).
2. After loosening the mounting screws, then remove the rear door trim (A).




3. Disconnect the power window switch connector (A).




4. Installation is the reverse of removal.

NOTE:
- Make sure connectors are connected properly and each rod is connected securely.
- Make sure the door lock and opens properly.
- Replace any damaged clips.