Front Door Window Glass: Service and Repair

Replacement

Glass Replacement
1. Remove the following items :
A. Front door trim
2. After loosening the mounting screw, then remove the front door inside handle (A).




3. Disconnect the front door inside handle cable (A).




4. Disconnect the front door speaker connector (A).




5. After loosening the mounting screws, then remove the front door trim seal mounting bracket (B).
6. Remove the front door trim seal (A).

NOTE:
- Replace any damaged door trim seal.




7. Remove the front door belt inside weatherstrip (A).




8. Carefully move the glass (A) until you can see the bolts, then loosen them. Separate the glass from the glass run and carefully pull the glass out through the window slot.

CAUTION:
- Take care not to drop to glass and scratch the glass surface.

Tightening torque :
7.8 - 10.8 N.m (0.8 - 1.1 kgf.m, 5.8 - 8.0 lb-ft)




9. Installation is the reverse of removal.

NOTE:
- Roll the glass up down to see if it move freely without binding.
- Adjust the position of the glass as necessary.