Repair Procedures

Replacement

CAUTION:
- Put on gloves to protect your hands.
- Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
- Take care not bend or scratch the cover and other parts.

1. After loosening the mounting clips, then remove the radiator grille upper cover (A).




2. Loosen the front bumper upper (A) mounting clips.




3. After loosening the front bumper side's mounting screw, then disconnect the side's.




4. Remove the front bumper lower mounting clips.




5. Disconnect the fog lamp connector (A).




6. Remove the front bumper cover (A).




7. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.