Repair Procedures

Removal

NOTE:
- Take care not to scratch the center fascia panel and related parts.
- Eject all the disc before removing the audio unit to prevent damaging the CD player's load mechanism.

1. Disconnect the negative (-) battery terminal.
2. Using a screwdriver or trim remover, remove the center fascia panel (A).




3. Disconnect the start/stop button connector (A) and hazard switch connector (B).




4. After loosening the mounting screws, then remove the audio assembly (A).




5. Disconnect the audio connector and cable (A).






Installation

1. Connect the audio unit connectors and cable.
2. Install the audio unit.
3. Install the crash pad center fascia garnish.
4. Check the audio system.

NOTE:
Make sure the audio head unit connectors are plugged in properly, and the antenna cable is connected properly.