Scantool Diagnostics

Tire Pressure Monitoring
C1325 Sensor 4 Over Temperature - Scantool Diagnostics

Monitor GDS Data

1. Set up 'GDS' with 'GDS TPMS'.
2. Select "Vehicle S/W Management" function.
3. Select the "Sensor Status" mode of "Data Treatment" item.
4. Postion the GDS TPMS as near as possible to the tire.
(Reading may take 30 - 60 seconds depending on the sensor's characteristics. )

Specification :Below 230°F(110°C)




Fig.1) Data displayed by TPMS Exciter
5. Is the service data shown normally?