Rear Upper Arm

Replacement

1. Remove the rear wheel & tire.

Tightening torque:
88.3 - 107.9N.m(9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
Be careful not to damage the hub bolts when removing the rear wheel & tire.

2. Loosen the bolt & nut and then remove the rear upper arm (A) from the rear axle.

Tightening torque:
137.3 - 156.9N.m(14.0 - 16.0kgf.m, 101.3 - 115.7lb-ft)




3. Loosen the bolt & nut and then remove the rear upper arm (A) from the sub frame.

Tightening torque:
137.3 - 156.9N.m(14.0 - 16.0kgf.m, 101.3 - 115.7lb-ft)




4. Installation is the reverse of removal.

CAUTION:
Install the rear upper arm so that the letter "R" can face the rear of vehicle.

Inspection

1. Check the bushing for wear and deterioration.
2. Check the rear lower arm for deformation.
3. Check the coil spring and spring pad for deterioration and deformation.
4. Check for all bolts and nut.