Front Lower Arm

Replacement

1. Remove the front wheel & tire.

Tightening torque:
88.3 - 107.9N.m(9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
Be careful not to damage to the hub bolts when removing the front wheel & tire.

2. Loosen the bolt & nut and then remove the lower arm (A).

Tightening torque:
98.1 - 117.7N.m(10.0 - 12.0kgf.m, 72.3 - 86.6lb-ft)




3. Loosen the bolts and nuts and then remove the front lower arm (A).

Tightening torque
Front:
117.7 - 137.3N.m(12.0 - 14.0kgf.m, 86.8 - 101.3lb-ft)
Rear:
137.3 - 156.9N.m(14.0 - 16.0kgf.m, 101.3 - 115.7lb-ft)








4. Installation is the reverse of removal.

Inspection

1. Check the bushing for wear and deterioration.
2. Check the front stabilizer bar for deformation.
3. Check the all bolts and nuts.