Repair Procedures

Removal

1. Remove the under cover (A).

Tightening torque:
7.8 - 11.7 N.m (0.8 - 1.2 kgf.m, 5.7 - 8.6 lb-ft)




2. Disconnect the Electric Oil Pump (EOP) connector (A).




3. Disconnect the Electric Oil Pump (EOP) connector (A) and clips (B).




4. Remove the Electric Oil Pump (EOP) (A).




5. Installation is the reverse of removal.

NOTE:
- Adding automatic transaxle fluid.