Scantool Diagnostics

HEV Motor System
P1C64 Drive Motor \'A\' Phase Cable Circuit Open - Scantool Diagnostics

Monitor Scantool Data

1. Ignition ON (SSB LED "BLUE") & Vehicle "STOP".
2. Connect GDS and select "DTC Analysis" mode.
3. Click "DTC Status" on the menu bar to view DTC information.
4. Confirm that the "DTC Readiness Flag" indicates "COMPLETED". If not, drive the vehicle within conditions noted in Freeze Frame Data or Enable Conditions.
5. Read the "DTC Status" parameter.




6. Is parameter displayed "Present fault"?






Monitor Scantool Data

1. Ignition ON/Hybrid Ready (Cluster Indicator "READY" On) Vehicle Parked.
2. Connect GDS and select "Data Analysis" mode.
3. Selet "Currnet Data"mode and monitor "MCU Ready Flag" parameter.




Fig.1) If the MCU Ready Flag is "OFF", it means MCU is not reday to operates.
4. Is the "MCU Ready Flag" dispayed as "OFF" ?