W/Harness Inspection

Air Conditioner
B1805 E-Comp Fault (Over_Loaded) - Inspection/Repair:_:W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor connection. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for pushing back, looseness, poor connection, bending, corrosion, contamination, deterioration,or damage for High/Low Voltage Connector.
3. Has a problem been found?










Cooling Fan Inspection

Check the Cooling Fan status when A/C ON
1. Is the Cooling Fan functioning well?






Active Air Flap Inspection

Check the Active Air Flap status
1. Is the AAF open?






A/C On Operating Inspection

Wait 20 minutes and then check the E-Comp operating status when A/C ON
1. Is the E-Comp functioning well?