Repair Procedures

Removal and Installation

1. Remove the front muffler (B) after disconnecting the oxygen sensor connector (A).

Tightening torque:
39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)








2. Remove the catalytic converter & center muffler assembly (B) after disconnecting the oxygen sensor connector (A).

Tightening torque:
39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)








3. Remove the main muffler (A).

Tightening torque:
39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)




4. Installation is the reverse order of removal.

NOTE:
When installing, replace with new gaskets.