Coupe

Replacement

Trunk Lid Replacement
1. Detach the clips, then remove the trunk trim (A).

NOTE:
- When removing and installing the trunk lid, an assistant is necessary.
- Wear gloves to protect hands from injury.




2. Disconnect the wiring harness.
3. After loosening the mounting bolt, remove the trunk lid (B).




4. Installation is the reverse of removal.

NOTE:
- Replace any damaged clips.

Trunk Lid Weatherstrip Replacement
1. Remove the trunk lid weatherstrip (A).




2. Installation is the reverse of removal.

Trunk Lid Latch Replacement
1. Remove the trunk lid trim.
2. Disconnect the connector (B).
3. After loosening the mounting bolt, then remove the latch assembly (A).




4. Disconnect the cable (A).




5. Installation is the reverse of removal.

NOTE:
- Make sure the trunk lid latch cable is connected properly.
- Make sure the trunk lid locks securely.

Adjustment

1. After loosening the trunk lid hinge (A) mounting bolt, adjust the trunk lid by moving it up or down, or right or left.
2. Adjust the trunk lid height by turning the trunk lid overslam bumpers (B).
3. After loosening the trunk lid latch (C) mounting bolts, adjust the trunk lid latch by moving it up or down, or right or left.