Repair Procedures

Replacement

1. Remove the rear wheel & tire.

Tightening torque Nm (kgf.m, lb-ft) :
90 - 110 (9.0 - 11.0, 65 - 80)

2. Remove the rear shock absorber from the torsion beam axle by loosening the nut.

Tightening torque Nm (kgf.m, lb-ft) :
100 - 120 (10.0 - 12.0, 72 - 87)




3. Installation is the reverse of removal.

Inspection

1. Check the coil spring for crack and deformation.
2. Check the coil spring pad for damage and deformation.