Fuel Pump

Removal

1. Release the residual pressure in fuel line .
2. Remove the fuel pump service cover (A) in the trunk.




3. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
4. Disconnect the fuel feed tube quick connector (C).
5. Remove the fuel pump plate cover (D) after removing the bolts.




6. Remove the fuel pump from the fuel tank.






Installation

1. Installation is reverse of removal.

CAUTION:
Be careful of fuel pump direction (Refer to the groove in the fuel tank).

Fuel pump installation bolt :
2.0 - 2.9 N.m (0.2 - 0.3 kgf.m, 1.4 - 2.2 lb-ft)