Fog/Driving Lamp: Service and Repair

Inspection

1. Disconnect the negative(-) battery terminal.
2. Remove the lighting switch of the multi-function switch. (Refer to the multi-function switch)
3. With the front fog lamp switch, make sure that continuity exists between the terminals below.
If continuity is not as specified, replace the multi-function switch.





Front Fog Lamp






Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the front wheel guard clip(2EA).

3. Disconnect the front fog lamp connector (A).




4. Replace the front fog bulb (A) turning it in the counter clock-wise direction.






Installation

1. Install the front fog bulb.
2. Reconnect the lamp connector.
3. Install the front bumper.