Transmission Cooler: Service and Repair

Removal

1. Air cleaner assembly and air duct.

2. Remove the ATF Warmer hose (A).




3. Remove the under cover (A).

Tightening torque:
7.8 - 11.7 N.m (0.8 - 1.2 kgf.m, 5.7 - 8.6 lb-ft)




4. Remove the mounting bolt (A) and hose (B).
5. Remove the ATF Warmer (C) after removing the nut (5EA).

Tightening torque:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)




6. Installation is the reverse of removal.

NOTE:
- Adding automatic transaxle fluid. " in this group.)