Campaign SA106 - HPCU Connector Replacement: Overview

NUMBER 026

GROUP Electrical

DATE November 2011

MODEL 2011MY Optima Hybrid (TF HEV)

SUBJECT: SERVICE ACTION: OPTIMA HYBRID (TF HEV) HPCU CONNECTOR REPLACEMENT (SA106)

This bulletin provides the procedure to replace the HPCU (Hybrid Power Control Unit) input connector and A/C output connector with an improved version on Optima Hybrid vehicles produced from start of production to October 28, 2011. Kia is requesting the completion of this Service Action on all affected Optima Hybrid vehicles. Before conducting the procedure, verify that the vehicle is included in the list of the affected VINs.





*NOTICE
A Service Action is a repair program without customer notification that is performed during the warranty period. Any dealer requesting to perform this repair outside the warranty period will require DPSM approval.

Repair status for a VIN is provided on WebDCS (Service > Warranty Coverage > Warranty Coverage Inquiry > Campaign Information). Not completed Recall / Service Action reports are available on WebDCS (Consumer Affairs > Not Completed Recall > Recall VIN > Select Report), which includes a list of affected vehicles.

This issue number is SA106.





AFFECTED VEHICLE PRODUCTION RANGE





REQUIRED PARTS





TOOLS AND SUPPLIES





WARRANTY CLAIM INFORMATION

*NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA106 when accessing the WebDCS system.