Evaporative Emission Control Canister: Service and Repair

Removal

1. Remove the fuel tank.
2. Disconnect the vapor tube quick-connector (A) and the ventilation hose (B).








3. Remove the canister after removing the installation bolts (A,B).








Auxiliary Canister
1. Remove the canister assembly.
2. Disconnect the ventilation hose (A) and then remove the nuts (B).
3. Remove the auxiliary canister (C).














Inspection

1. Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube




A: Canister <-> Atmosphere
(NVLD module and Fuel Tank Air Filter)
B: Canister <-> Intake Manifold (PCSV)
C: Canister <-> Fuel Tank

Installation

Installation is the reverse of removal.

Canister installation bolt:
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)
Canister protector installation bolt:
8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb-ft)
Auxiliary canister installation bolt:
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)