Turn Signal Lamp: Service and Repair

Removal

Side Repeater Lamp
1. Disconnect the negative (-) battery terminal.
2. Open the front door.
3. Remove the side repeater lamp assembly by using the a flat-tip screwdriver.





NOTE:
Apply the protective tapes on the arrow area and its related parts.

4. Replace the bulb if it is necessary.

Door Mirror Turn Signal Lamp
1. Disconnect the negative (-) battery terminal.
2. Remove the door mirror and door mirror cover (A) after removing the screw.





NOTE:
Take care not to damage the mirror holder fixing clip.

3. Remove the door mirror cover (A) after removing the fixing clip.





NOTE:
Take care not to damage the mirror cover fixing clip.

4. Remove the door mirror turn signal lamp (B) after removing the screw and connector (A).






Installation

Side Repeater Lamp
1. Install the bulb to the side repeater lamp assembly.
2. Install the side repeater lamp.

Door Mirror Turn Signal Lamp
1. Install the door mirror turn signal lamp to the door mirror.
2. Install the door mirror.
3. Connect the battery terminal (-).