Repair Procedures

Removal

1. Disconnect the negative(-) battery terminal.
2. Remove the steering column assembly.

3. Remove the PDM relay, before removing the PDM.
4. Disconnect the power distribution module(PDM) connectors.
5. Remove the power distribution module(A) after loosening nut and bolt.










Installation

1. Install the power distribution module and PDM relay.
2. Install the steering column assembly.

Inspection

PDM Diagnosis With GDS
1. It will be able to diagnose defects of Smart key with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring and self diagnosis.
2. Select model and "Smart key system(Button start)" menu if you want to check PDM.




3. Select "PDM" in the manu.




4. Select "Current Data", if you want to check current data of PDM.
It provides the input/output status of each module.




5. If you want to check PDM data operation forcefully, select "Actuation test".




DTC Code List





Input/output Current Data





Actuation Test