Repair Procedures

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad center facia panel.

3. Disconnect the connector(A) from the crash pad center facia panel.




4. Remove the heater control unit(A).




5. Remove the mounting bolts then remove the audio unit(A).




6. Disconnect the audio connectors and cable(A).






Installation

1. Connect the audio unit connectors and cable.
2. Install the audio unit.
3. Install the crash pad center facia panel.
4. Install the upper tray.
5. Check the audio system.

NOTE:
- Make sure the audio head unit connectors are plugged in properly, and the antenna cable is connected properly.