Seats: Service and Repair

Replacement

Seat assembly replacement
1. After loosening the seat assembly mounting bolts, remove the seat assembly (A).




2. Disconnect the connectors (B), and remove the seat assembly.









CAUTION:
SEAT MOUNTING BOLT INSTALLATION PROCEDURE (manual seat only)
- Set the into the most rearward position. check that each slide is locked, and then tighten the front mounting bolt temporarily.
- Set the seat into most forward position. check that each slide is locked, and then tighten the rear mounting bolt completely.
- Set the seat into the most rearward position. Tighten the front mounting bolt completely.
- Check that the seat operates forward and back smoothly and it properly locks in position