Verification of Vehicle Repair

C1204 Wheel Speed Sensor Front-RH Range / Performance / Intermittent

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.
1. Connect scantool and select "Diagnostic Trouble Codes (DTCs)" mode.
2. Using a scantool, Clear DTC.
3. Operate the vehicle within DTC Detecting Condition in General Information. (Start and drive vehicle in gear and maintain vehicle speed is approx. 40 km/h or more (24 mph or more))4. Are any DTCs present?
4. Are any DTCs present?