Cylinder Head

Note: "Head Bolts are Reusable"

Cylinder Head

Tighten the cylinder head bolts with the plain washers in several steps as following order.

NOTE:
- In assembling washers, the marked surface should face upward.
- In installing the cylinder head bolts, apply engine oil on the thread of the bolts and the surface of the washers.

CAUTION: Always use new cylinder head bolts.

Tightening torque 22.6 - 26.5 Nm (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft) + 58 - 62° + 43 - 47°






NOTE: Using the SST(09221-4A000), tighten the bolts which need to be tightened with the angular tightening method.






SURFACE VARIATION - WARPAGE