Brake Lamp: Service and Repair

Removal

Rear Combination Outside Lamp
1. Disconnect the negative (-) battery terminal.
2. Remove the trim cover (A).




3. Remove the rear combination lamp (Outside) fixing nuts (4EA).




4. Remove the outside rear combination lamp (A) and connector (B).




5. Replace the bulbs (A). (Replace the lamp assembly when the LED is out of order)





Rear Combination Inside Lamp
1. Disconnect the negative (-) battery terminal.
2. Loose the nuts holding the rear combination inside lamp (A).




3. Remove the connector (B) and rear combination inside lamp (A).




4. Replace the bulbs (A). (Replace the lamp assembly when the LED is out of order)






Installation

1. Install the rear combination outside lamp assembly.
2. Install the rear combination inside lamp assembly.