Monitor DTC Status

P0722 Output Speed Sensor Circuit No Signal

Scantool Diagnostics

Monitor Scantool Data

1. Connect scantool to data link connector (DLC)
2. Engine "ON".
3. Monitor the "OUTPUT SPEED SENSOR" parameter on the scantool
4. Driving at speed of over 19 Mile/h (30 Km/h)

Specification :Increasing Gradually
























Fig 1) P,N
Fig 2) "D 1st" gear
Fig 3) "2nd" gear
Fig 4) "3rd" gear
Fig 5) "4th" gear
Fig 6) "5th" gear
5. Does "output speed sensor " follow the referance data?