System Inspection

System Inspection

Cooling System Inspection
1. Check cooling system coolant level and fill if low.
2. Check for a proper cooling system operation. Especially check that cooling and condenser fan working normally.
3. Remove the thermostat and check the following items:
(1) Stuck or damaged
(2) Verify the temperature at which the valve begins to open.
A. Valve opening temperature : 80-84 °C (176-183.2 °F)
B. Valve opening temperature : 95 °C (203 °F)
4. Is a problem found?
YES
1) Repair as necessary and go to "Verification of Vehicle Repair" procedure
NO
1) Go to W/Harness Inspection - "Terminal and Connector Inspection" procedure