Component Inspection

Component Inspection

1. Check FTPS
(1) IG "OFF" and connect scantool to DLC (Data Link Connector).
(2) Monitor "FTPS" parameter on service data
A. Specification :





(3) Does the "FTPS" parameter change after acceleration ?
YES
1) Fault is intermittent. Drive the vehicle to satisfy the enable condition then, go to "Verification of Vehicle Repair" procedure.
NO
1) Substitute with a known - good FTPS and check for proper operation.
If the problem is corrected, replace FTPS and go to "Verification of Vehicle Repair" procedure.